Error Code E6
AC Motor (Clutch Motor) Error — AC motor has bad connection or failed, or clutch/coupling is failed.
Moderate
Address soon - your appliance may not work properly
What This Means
AC motor has bad connection or has failed; Clutching has failed; Coupling is out of gear; Coupling is broken
How to Fix
- 1
Check the connections at the AC motor and at the WHITE 6-pin connector at the main board — reseat if disconnected
- 2
Test AC motor to determine if it is defective
- 3
Replace the AC motor if necessary
- 4
Inspect coupling — replace the coupling or clutch housing if necessary
This Error Applies To
LG WT1901CK Series Washers (2016) (2016–present)
Related Error Codes
Pressure Sensor Error — pressure switch has a bad connection or has failed.
Drainage Error — water is not completely drained within 12 minutes.
Motor Error (Foreign Object) — foreign object caught between the wash plate and inner basket.
Lid Lock Error — lid lock mechanism failed to lock or unlock.
Thermistor Error — thermistor has a bad connection or has failed.
Lid Open Error — lid is opened during intermittent spin, normal spin, or while processing a delay reservation.
Overflow Error — water level has exceeded the safe level.
Water Supply Error — water level does not rise to set level within 30 minutes. NO INLET lamp blinks.