Error Code Humidity
Indoor humidity monitoring sensor is not responding
Moderate
Address soon - your appliance may not work properly
Also displayed as: Humidity
What This Means
Bad connector contact at CN34; Humidity sensor unit malfunction; Voltage reading outside 1.0V-3.5V range; Iced-solder or solder bridging; Defective MICOM input at pin #8
What actually causes this:
Moisture damage to sensor or connector corrosion inside refrigerator
First Thing to Check
Check humidity sensor area for visible water or corrosion
Parts Involved
How to Fix
- 1
1. Check MAIN PCB Connector CN34 insertion
- 2
2. Measure voltage between CN34-4 and CN34-6 (should be 1.0V-3.5V)
- 3
3. Verify input voltage at IC01 MICOM pin #8
- 4
4. Inspect for iced-solder or solder bridging
- 5
5. Check for resistance opened (approximately 50 ohms)
- 6
6. Check resistance value R349 on MICOM pin #8
This Error Applies To
Samsung DRF36C100SR Series Refrigerators (2017) (2017–present)
Related Error Codes
Freezer is not sensing temperature correctly
Fresh food section is not sensing temperature correctly
Defrost heating sensor in fridge section is not working
Defrost heating sensor in freezer section is not working
Compressor is not getting adequate cooling air flow
Outdoor temperature sensor is not working properly
Ice maker temperature sensor is not reading correctly
Freezer is not getting cool air circulation