Error Code 09
Freezer defrost sensor malfunction or disconnection
Moderate
Address soon - your appliance may not work properly
Also displayed as: Left - ③ LED ON
What This Means
Sensor connector missing or loose; Electric wire cut or shorted; Short circuit in sensor wiring; Sensor element failure
What actually causes this:
The sensor that detects when to begin and end the defrost cycle in the freezer has failed or disconnected, disrupting normal defrost operation
First Thing to Check
Check the defrost sensor connector at MAIN PCB CN30 for loose connections
Parts Involved
How to Fix
- 1
Measure voltage between MAIN PCB CN30 #4 and #7
- 2
Voltage should be within 4.5V to 1.0V range
- 3
Check wire continuity from PCB to evaporator area
- 4
Verify connector pin integrity
This Error Applies To
Samsung RS25J500 Series Refrigerators (2010) (2010–present)
Related Error Codes
Main and panel control boards cannot communicate
Ice ejector or level sensor repeated failure
Freezer fan motor failure or control signal loss
Ice maker sensor malfunction or disconnection
Damper heater element or connection failure
Compressor startup failure or abnormal operation
Ambient temperature sensor malfunction or disconnection
Condenser fan motor failure or control signal loss