Error Code 10
Freezer fan motor failure or control signal loss
Moderate
Address soon - your appliance may not work properly
Also displayed as: Left - ④ LED ON
What This Means
Fan motor not operating; Feedback signal line contact failure; Motor wiring missing or broken; Motor bearing failure
What actually causes this:
The fan that circulates cold air through the freezer section has failed or lost its control signal, stopping air circulation
First Thing to Check
Check voltage at MAIN PCB CN75 between #1 (GRAY) and #4 (YELLOW); should be 7-12V
Parts Involved
How to Fix
- 1
Check voltage between MAIN PCB CN75 #1 (GRAY) and #4 (YELLOW)
- 2
Voltage should be 7V to 12V
- 3
Listen for fan motor operation
- 4
Check for motor shaft free rotation
- 5
Verify connector pin continuity
This Error Applies To
Samsung RS25J500 Series Refrigerators (2010) (2010–present)
Related Error Codes
Main and panel control boards cannot communicate
Ice ejector or level sensor repeated failure
Ice maker sensor malfunction or disconnection
Damper heater element or connection failure
Freezer defrost sensor malfunction or disconnection
Compressor startup failure or abnormal operation
Ambient temperature sensor malfunction or disconnection
Condenser fan motor failure or control signal loss