Error Code OC
The washer has too much water inside
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor is defective; Water is supplied continuously due to freezing in the water supply valve; Foreign materials blocking the water supply valve in the open position
What actually causes this:
The water level sensor has failed and the washer kept filling with water past the normal level
First Thing to Check
Turn off the washer immediately and unplug it — do not attempt to run any cycles
Parts Involved
How to Fix
- 1
1. Replace the water level sensor
- 2
2. Check the water supply valve for foreign materials or freezing
- 3
3. Restart after spinning
- 4
4. Turn off the washer, unplug it, wait one minute, and plug it back in
This Error Applies To
Samsung WA54CG7550 Series Washers (2024) (2024–present)
Related Error Codes
The dryer temperature sensor is not reading correctly
The cold water hose is hooked up wrong
The water level sensor cannot detect the water level correctly
The washer's motor has stopped working
The washer is not getting any water
The washer cannot drain the water out
The washer is getting too much voltage from the outlet
The washer is not getting enough voltage from the outlet