Error Code SDC
The detergent drawer is not closed all the way
Moderate
Address soon - your appliance may not work properly
Also displayed as: SDC
What This Means
Detergent drawer is not fully closed; Detergent or softener buildup preventing drawer from closing; Drawer is misaligned
What actually causes this:
The detergent drawer was not pushed in far enough or has dried detergent buildup preventing it from closing
First Thing to Check
Push the detergent drawer in firmly until you hear it click
Parts Involved
How to Fix
- 1
1. Push the detergent drawer in firmly until you hear a click
- 2
2. Remove the drawer and clean any detergent buildup
- 3
3. Check that the drawer slides smoothly on its tracks
This Error Applies To
Samsung WA54CG7550 Series Washers (2024) (2024–present)
Related Error Codes
The dryer temperature sensor is not reading correctly
The cold water hose is hooked up wrong
The water level sensor cannot detect the water level correctly
The washer's motor has stopped working
The washer is not getting any water
The washer cannot drain the water out
The washer is getting too much voltage from the outlet
The washer is not getting enough voltage from the outlet