Error Code Ur
The washer is doing an extra rinse because the load was uneven
Moderate
Address soon - your appliance may not work properly
Also displayed as: Ur
What This Means
Unbalance detected during spin cycle triggering additional rinse
What actually causes this:
The clothes shifted during spin so the washer added a rinse to try to rebalance them
First Thing to Check
Press any button to clear the message — no action needed
How to Fix
- 1
1. This is an informational display, not a critical error
- 2
2. Press any key to release the display
- 3
3. If it occurs frequently, check that the load is evenly distributed
This Error Applies To
Samsung WA54CG7550 Series Washers (2024) (2024–present)
Related Error Codes
The dryer temperature sensor is not reading correctly
The cold water hose is hooked up wrong
The water level sensor cannot detect the water level correctly
The washer's motor has stopped working
The washer is not getting any water
The washer cannot drain the water out
The washer is getting too much voltage from the outlet
The washer is not getting enough voltage from the outlet