Error Code bE
Your washer detected a problem with its motor sensor.
Moderate
Address soon - your appliance may not work properly
Also displayed as: bE
What This Means
IPM terminal of main PBA is not connected; DD motor cover is out of place; PCB housing terminal is not connected; PBA fault; DD motor fault
What actually causes this:
Usually a loose electrical connection inside the machine or the motor cover shifted out of position.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the motor stator whether the cover is damaged
- 2
2. Check the motor connector and sensor connector
- 3
3. Check for washing motor rotor and stator fault
- 4
4. Check for coil disconnections due to foreign material
- 5
5. If Main PCB fault, replace the PBA
This Error Applies To
Samsung WF42H5000AW Series Washers (2014) (2014–present)
Related Error Codes
Your washer's motor is struggling and cannot run properly.
Your washer cannot detect the water level properly.
Your washer's motor cannot spin the drum.
Your washer cannot pump the water out.
The control boards inside your washer are not communicating.
Your washer is not getting enough water.
Your washer is not getting the right amount of electrical power.
The water coming into your washer is too hot for the selected cycle.