Error Code 6C1
The detergent pump motor is jammed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 6C1
What This Means
Auto detergent dispenser motor is stalled/arrested on input
What actually causes this:
Dried or thickened detergent has jammed the dispenser pump motor.
First Thing to Check
Clean the auto-dispense detergent compartment with warm water to dissolve any dried detergent.
Parts Involved
How to Fix
- 1
1. Check wire connection to detergent motor
- 2
2. If necessary, replace the ASSY PUMP assembly
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.