Error Code 6C5
The sensor that monitors the dispenser motor movement has failed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 6C5
What This Means
Motor motion perception sensor fault in auto-dispense system
What actually causes this:
The sensor that confirms the dispenser motor is actually moving has failed.
First Thing to Check
Unplug the washer for 60 seconds, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections to the motion sensor
- 2
2. If necessary, replace the ASSY PUMP assembly
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.