Error Code 8C
The vibration sensor board has detected an error.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
Error detected in the MEMS PBA; Data error detected from MEMS sensor; Wire connection fault; Main PBA silver nano part malfunction
What actually causes this:
The vibration sensor board (MEMS) has lost its connection or failed internally.
First Thing to Check
Unplug the washer for 60 seconds, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections to MEMS PBA
- 2
2. Replace the MEMS PBA if connections are good
- 3
3. Check main PBA wire connections
- 4
4. If main PBA silver nano part is malfunctioning, replace main PBA
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.