Error Code dC2
The door lock circuit overheated from repeated power cycling.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC2
What This Means
Power switch turned on/off continually; Too much heat generated in door lock circuit
What actually causes this:
Repeatedly turning the washer on and off in quick succession caused the door lock circuit to overheat.
First Thing to Check
Unplug the washer, wait 10 minutes for it to cool, then plug it back in and try once.
Parts Involved
How to Fix
- 1
1. Check door lock switch and wiring
- 2
2. Check main PBA door sensing circuit
- 3
3. This error is difficult to reproduce — check for signs of heat damage on connectors
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.