Error Code SDC
The detergent drawer is not properly connected or detected.
Moderate
Address soon - your appliance may not work properly
Also displayed as: SDC
What This Means
Detergent drawer contact fault; ASSY PUMP DRAIN fault (sub-material of assy drawer)
What actually causes this:
Detergent residue has built up on the drawer contacts, preventing the machine from detecting the drawer properly.
First Thing to Check
Pull the detergent drawer all the way out, wipe down the inside of the drawer slot and the drawer itself, then push it back in firmly.
Parts Involved
How to Fix
- 1
1. Open and close the detergent drawer again
- 2
2. Disassemble detergent drawer and clean the housing connector
- 3
3. Try operation again after cleaning
- 4
4. If cleaning does not help, replace the ASSY PUMP DRAIN (sub-material of assy drawer)
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.