Error Code Sud
There are too many soap suds in the washer.
Moderate
Address soon - your appliance may not work properly
Also displayed as: Sud/SUdS
What This Means
Too much detergent used; Non-HE detergent used in HE machine; Excessive foaming in drum
What actually causes this:
Too much detergent was used, or a non-HE (high-efficiency) detergent was used. The machine is pausing to get the suds under control.
First Thing to Check
Just wait — the washer is automatically removing the excess suds and will resume on its own.
How to Fix
- 1
1. Wait for suds removal cycle to complete — machine will display 'End' when done
- 2
2. Normal cycle will proceed after suds removal
- 3
3. This is a normal operation for preventing non-sensing faults
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.