Error Code tC1
The water temperature sensor is giving incorrect readings.
Moderate
Address soon - your appliance may not work properly
Also displayed as: tC1
What This Means
Washing temperature sensor fault; Faulty or incorrect connections of dry condensing sensor; Main PCB fault; Freezing in winter season; IPM temperature abnormally high
What actually causes this:
The temperature sensor connector has come loose from vibration, or the sensor itself has failed.
First Thing to Check
Unplug the washer for 5 minutes, then restart. If the error returns, call for service.
Parts Involved
How to Fix
- 1
1. Check connections for the washing heater temperature sensor connector
- 2
2. If washing heater temperature sensor has functional error, replace it
- 3
3. Check connections for dry heater temperature sensor connector (tC2)
- 4
4. Check for frozen water supply in winter
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.