Error Code tC2
The dryer temperature sensor is not working properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: tC2
What This Means
Dry temperature sensor fault (short-circuit or wire disconnection); Connector out of place or contact error; Main PCB fault; Freezing in winter season
What actually causes this:
The dryer section's temperature sensor has failed or its connector has come loose.
First Thing to Check
Unplug the washer for 5 minutes and restart.
Parts Involved
How to Fix
- 1
1. Check connections for the dry heater temperature sensor connector
- 2
2. If dry heater temperature sensor has functional error, replace it
- 3
3. Check connector is properly seated
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WW22N6850QX Series Washers (2018) (2018–present)
Related Error Codes
The incoming water is too hot for the selected delicate cycle.
The main board and motor inverter have lost communication.
The sensor that measures how much detergent is left has failed.
The sensor that measures how much fabric softener is left has failed.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer is not getting water or not getting enough water.