Error Code C-F0
Communication between Main and Sub PCB is interrupted
Moderate
Address soon - your appliance may not work properly
What This Means
Connector on main PCB not inserted; Connector on sub PCB not inserted; Damaged wire harness between PCBs; Shorted connector pins
How to Fix
- 1
Disconnect power
- 2
Unplug connector on Sub and Main PCB
- 3
Check wire harness between main and Sub PCBs
- 4
Check connector pins on Sub and Main PCB if circuit is shorted
- 5
Repair damaged harness or replace
- 6
Repair the area of the circuit that is shorted
- 7
Replace Sub PCB and Main PCB if needed
Other Error Codes for NE58H9970WS
Key short or keypad cable issue
PCB temperature sensor is short or PCB temperature rises abnormally high
Communication between Main and Touch PCB is interrupted
Door lock is mispositioned or door lock switch/motor issue
Oven sensor is short when operating or internal temperature rises abnormally high
PCB temperature sensor is open when oven is operating
Communication between Display PCB and Inverter Module PCB is interrupted
Oven sensor is open or sensor has high resistance when oven is operating