Error Code 86
Freezer compressor is getting too much power
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 86Er
What This Means
DC bus voltage too high; SMPS output voltage regulator failure; Inverter feedback circuit failure; Overvoltage protection activated
What actually causes this:
Power supply regulator failed or circuit board shorted
First Thing to Check
Power cycle the refrigerator to reset the error
Parts Involved
How to Fix
- 1
Measure DC bus voltage on inverter PCB
- 2
Voltage should not exceed DC18V
- 3
Check SMPS output regulation
- 4
Verify feedback circuit
- 5
Test link resistor
Other Error Codes for BRF425200AP
FlexZone compartment sensor failed
Pantry compartment temperature sensor failed
Outside humidity sensor is broken
Outside temperature sensor is broken
FlexZone defrost sensor is not working
Fridge temperature sensor is broken or disconnected
Fridge defrost sensor is not working
Freezer temperature sensor is broken or disconnected