Error Code dL
Lid Lock Error — lid lock mechanism failed to lock or unlock.
Moderate
Address soon - your appliance may not work properly
What This Means
Lid lock switch failed or not engaging properly; Lid is not balanced / aligned; Solenoid not operating; Door will attempt to lock 3 times; if unsuccessful, the solenoid drives the latch to the open position
How to Fix
- 1
Check the lid lock switch — attempt to lock; if solenoid is trying to lock, replace the Lid Lock SW
- 2
If solenoid is not trying, replace the Main PCB
- 3
Replace the lid or adjust the balance/alignment of the lid
- 4
Verify 16.5V is supplied to the solenoid during lock operation
Other Error Codes for WT1901CK
Motor Error (Foreign Object) — foreign object caught between the wash plate and inner basket.
Unbalance Error — laundry unbalance detected during spin.
Overflow Error — water level has exceeded the safe level.
Lid Open Error — lid is opened during intermittent spin, normal spin, or while processing a delay reservation.
Pressure Sensor Error — pressure switch has a bad connection or has failed.
Drainage Error — water is not completely drained within 12 minutes.
AC Motor (Clutch Motor) Error — AC motor has bad connection or failed, or clutch/coupling is failed.
Thermistor Error — thermistor has a bad connection or has failed.