Error Code PC1
Your washer's clutch position sensor is giving incorrect readings.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
After position of the clutch is detected, the signal of the clutch hall goes wrong; Clutch hall sensor malfunction
What actually causes this:
The sensor that tracks the clutch position has worn out or developed a fault.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connections
- 2
2. Verify clutch position detection
- 3
3. Replace clutch sensor or assembly if defective
Other Error Codes for WA52J8700AP
Your washer's vibration sensor board has a fault.
Your washer cannot detect the position of its internal clutch.
Your washer's main computer chip has failed.
Your washer's vibration sensor has detected a data error.
Your washer's water heating element has a specific fault.
Your washer's drying heater has a specific fault.
Your washer's vibration sensor board has failed.
Your washer's motor speed controller has lost connection to the main board.