Name: Samsung WV60M9900AV
Brand: Samsung

Question 1

What does error code 1C mean on Samsung WV60M9900AV?

Accepted Answer

The washer cannot detect the water level inside the tub.. Cause: Water level sensor hose is damaged or punctured; Hose is clogged with foreign material; Hose is folded or kinked; Too much lubricant applied to the air hose insertion part; Hose engagement error (disengaged); Part fault due to faulty internal soldering; Water level sensor terminal is disengaged; Main PBA fault; PBA connector terminal is not connected.

Question 2

What does error code 3C mean on Samsung WV60M9900AV?

Accepted Answer

The washer's motor cannot spin or is not responding correctly.. Cause: Motor spin net is not engaged; Motor internal coil is damaged (short-circuited or cut); Hall sensor terminal is not connected; Motor overloaded due to too much laundry; Foreign material causing interference; Erroneous operating signals from motor hall sensor; IPM terminal of main PBA not connected; DD motor cover is out of place; PCB housing terminal is not connected; PBA fault; DD motor fault.

Question 3

What does error code 4C mean on Samsung WV60M9900AV?

Accepted Answer

The washer is not getting enough water or no water at all.. Cause: Foreign material entering the water supply valve; Water supply valve terminal not connected or wire disconnected; Warm water and rinse connectors wrongly connected to each other; PCB terminal from drain hose to detergent drawer not connected; Transparent hose is folded or torn; Cold and warm water supply hoses wrongly engaged; Main PCB fault; Freezing in winter season.

Question 4

What does error code 4C2 mean on Samsung WV60M9900AV?

Accepted Answer

The incoming water is too hot for the selected gentle cycle.. Cause: Cold and warm water supply hoses are wrongly engaged into each other; Water temperature is sensed as higher than 50 degrees C in the Wool or Lingerie courses.

Question 5

What does error code 5C mean on Samsung WV60M9900AV?

Accepted Answer

The washer cannot pump out the water after a wash or rinse cycle.. Cause: Pump motor impeller is damaged internally; Wrong voltage supplied to parts; Part fault; Freezing in winter season; Drain hose is clogged with foreign material or injection error; Foreign material clogging the drain pump; Water pump terminal is not connected; Rubber bands, bills, cotton, hair pins, coins collected inside drain pump assembly; Main PCB fault; Poor physical connection of connector or wire.

Question 6

What does error code 8C mean on Samsung WV60M9900AV?

Accepted Answer

The washer's vibration and motion sensor system has a general fault.. Cause: MEMS PBA fault; Wire connection issue.

Question 7

What does error code 8C1 mean on Samsung WV60M9900AV?

Accepted Answer

The washer's vibration and motion sensor has detected a data error.. Cause: MEMS PBA fault; Data error in MEMS sensor; Wire connection issue.

Question 8

What does error code 8C2 mean on Samsung WV60M9900AV?

Accepted Answer

The washer's vibration and motion sensor hardware has failed.. Cause: MEMS PBA hardware fault; Wire connection issue.

Question 9

What does error code 9C1 mean on Samsung WV60M9900AV?

Accepted Answer

The washer is not getting enough electrical power to run properly.. Cause: Under voltage supplied to the washer; Use of a plug receptacle or extension cord causing voltage drop; Home electrical system power issues; Main PBA fault.

Question 10

What does error code 9C2 mean on Samsung WV60M9900AV?

Accepted Answer

The washer is getting too much electrical power, which can damage it.. Cause: Over voltage supplied to the washer; Home electrical system power surge; Main PBA fault.

WV60M9900AV

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
1C	The washer cannot detect the water level inside the tub.	Moderate
3C	The washer's motor cannot spin or is not responding correctly.	Moderate
4C	The washer is not getting enough water or no water at all.	Moderate
4C2	The incoming water is too hot for the selected gentle cycle.	Moderate
5C	The washer cannot pump out the water after a wash or rinse cycle.	Moderate
8C	The washer's vibration and motion sensor system has a general fault.	Moderate
8C1	The washer's vibration and motion sensor has detected a data error.	Moderate
8C2	The washer's vibration and motion sensor hardware has failed.	Moderate