Error Code 39
Ice maker assembly has a general functional failure
Moderate
Address soon - your appliance may not work properly
Also displayed as: Error 39
What This Means
Ice maker assembly failed internally; Ice maker motor not responding; Wiring connector to ice maker disconnected; Main PCB signal failure to ice maker
What actually causes this:
The ice maker unit itself has failed internally, or control signals to it are absent.
First Thing to Check
Open the refrigerator, remove the ice bucket, and press and hold the ice maker test button for 2 seconds to see if the ice maker arm moves.
Parts Involved
How to Fix
- 1
Replace the ice maker (R) assembly and reconnect power to test
- 2
Check Main PCB input signal at MICOM IC01 pin #90 (should be 0V when ice maker test switch pressed)
- 3
Verify ice maker motor operation using engineer mode Force Run function
This Error Applies To
Samsung RF23M85 Series Refrigerators (2017) (2017–present)
Related Error Codes
Humidity sensor in the fridge compartment has failed
Ice bucket compartment heater has an open or short circuit
Mid drawer damper heater has an open or short circuit
Auto-fill water tank has detected an overflow
Refrigerator defrost sensor has failed or disconnected
Freezer defrost sensor has failed or lost connection
Freezer temperature sensor has failed or lost connection
Ambient room temperature sensor has failed